Roof Replacement Cost Calculator
How our Roofing Cost Calculator Works
- Enter the approximate square footage of your home (Ground floor only)
- Estimate the pitch of your roof (See below for more information on selecting the correct pitch).
- Select the roofing material you would like on your roof. It’s that easy!
Our calculator will multiply the approximate square footage of your roof by the cost/sq ft. of the material you select to create an estimate of full roof replacement cost*
Estimate only. This calculator is very accurate however there are other factors that affect the actual square footage of the roofing materials to be replaced, such as roof overhangs and covered porches or patios. There are also other items such as ventilation products, flashing needs, skylights, and other accessories that can add to the cost. Therefore, a roof inspection and an actual written proposal is needed.
You can also choose to forward this information to one of our roofing experts to get a more accurate quote based on your home’s specific needs.
How to measure your roof's pitch
- Measure a horizontal distance of 12 inches (from the outside edge of your roof directly up the slope). This is called the run of your roof.
- Make a marking at exactly 12 inches. You can use chalk, pencil, or removable tape. Extend a level line from the 12-inch mark, suspended in air, that reaches back towards the edge of your roof.
- Measure the distance vertically from the end of the level line downwards towards the edge of your roof. This is called the rise of your roof.
- The rise (vertical measurement) over 12 inches of run (horizontal movement) determines the pitch of your roof. (For our general estimating purposes, a LOW pitch equals 3/12-5/12, MEDIUM 6/12-9/12 and HIGH 10/12- 12/12)
